martynfh

Hi I removed mine the other week, Jon is correct my mk 3 spit has the pins as well. Took a while for mine to come out. Lots of wd40 leave for while (left mine day or so) and using a small screwdriver that fits the hole tap it (you may need to get progressively harder). One of mine was araldited in. I had to cut it off. If you need to cut it off make sure you do it on the outsidenof the hole so you dont destroy the shaft of the switch. Martyn

Here thy are

Thanks everyone for your input. I have had a quick look on ebay and the inverted leds mentioned are for sale. They seem to have red, blue, yellow and green (those are the ones shown). Gaz Thanks I was aware. I have also seen the indications on the back after I sanded down the gauge. The large ones (4' speedo/rev counter) say Smiths but the little ones (2' temp/fuel) say accessories limited. I will post some pics of the before, during and after work on the gauges :) Martyn

Hi I am thinking of using LEDs instead of bulbs. Has anyone tried this and if so do they work at all.