wukkie1
-
Posts
109 -
Joined
-
Last visited
Never
wukkie1's Achievements
-
both have been recond. don't even know what spring is for. just wondered if there is a knack of fitting bill
-
hi folks I'm fitting an overdrive to gearbox on a 2l engine each time I put them together there is a spring pops out and jams up ant help please bill
-
brilliant thanks bill
-
thanks for that I cant enlarge wiper diagrams can I download that section bill
-
does anyone know lucas part number or have one for sale bill
-
I had the gearbox recond, and got another clutch fork mine didn't have the fork bit on so not holding in place
-
thanks going to take box out and will check all thanks
-
nice replt thanks. in my maual there seems to bo an adjustment on the pressure plate would this give me more clutch clearance bill
-
hi if I took the gearbox out from inside car could I then check the condition of clutch plate regards bill
-
thanks bill
-
hi phil very interested not been well have you still got them condition immaterial 07903079280
-
hi I have a vitesse and am looking for the rear roof pillar badges any help please
-
hi clutch better now but still rattling in that area...so I am going to drop the front crossmember and remove sump and fit new ends and mains. don't think this will cure anything but eliminated. after that I have got a new o/d filter gear box has only done 4000 miles since recon at fitchets, doesn't seem to be exhaust rattle but still maybe the cause. I will follow the problem through wit hthe forum and any other owner will have an interesting referral regards bill 07903079280
-
well folks many thanks I have removed the extra pusher in the slave cylinder and expct due to the very worn pressure plate and probably now weak fins the rebuild will resettle the slave movement. will know at the weekend !!! thanks bill
-
sound advice thanks