wukkie1
-
Posts
109 -
Joined
-
Last visited
Never
Content Type
Forums
Blogs
Events
Downloads
Gallery
Membership & Shop
Everything posted by wukkie1
-
both have been recond. don't even know what spring is for. just wondered if there is a knack of fitting bill
-
hi folks I'm fitting an overdrive to gearbox on a 2l engine each time I put them together there is a spring pops out and jams up ant help please bill
-
brilliant thanks bill
-
thanks for that I cant enlarge wiper diagrams can I download that section bill
-
does anyone know lucas part number or have one for sale bill
-
I had the gearbox recond, and got another clutch fork mine didn't have the fork bit on so not holding in place
-
thanks going to take box out and will check all thanks
-
nice replt thanks. in my maual there seems to bo an adjustment on the pressure plate would this give me more clutch clearance bill
-
hi if I took the gearbox out from inside car could I then check the condition of clutch plate regards bill
-
thanks bill
-
hi phil very interested not been well have you still got them condition immaterial 07903079280
-
hi I have a vitesse and am looking for the rear roof pillar badges any help please
-
hi clutch better now but still rattling in that area...so I am going to drop the front crossmember and remove sump and fit new ends and mains. don't think this will cure anything but eliminated. after that I have got a new o/d filter gear box has only done 4000 miles since recon at fitchets, doesn't seem to be exhaust rattle but still maybe the cause. I will follow the problem through wit hthe forum and any other owner will have an interesting referral regards bill 07903079280
-
well folks many thanks I have removed the extra pusher in the slave cylinder and expct due to the very worn pressure plate and probably now weak fins the rebuild will resettle the slave movement. will know at the weekend !!! thanks bill
-
sound advice thanks
-
hi I am the one with the rattly clutch. got gearbox out and clutch plate very goo, pressure plate fins nearly worn through. bearing mmm does not look as if its the rattly bit, looks as if the thrust bearing doesn't come of the clutch cover at all. slight upward movement of ring gear so I may take cross member off and look at the ends, should I do this ? don't know what I am asking for but confused as I have not foung anything major to cause the rattle bill thanks
-
yes there was only one obvious way towards the rear side bill;
-
THANKS JULIAN IN THE LAST MONTH I HAVE HAD NEW SLAVE CYLINDER, TO GET IT TO WORK I HAD TO CUT OLD PISTON IN HALF AND ADD TO THE SLAVE CYLIDER, NOW OK, THERE MUST BE SOMETHING WRONG INSIDE BUT IF I REMOVE GEARBOX AND CHANGE EVERTHING 1. IT MIGHT NOT GO AWAY OR I WOULUD NOT KNOW THE ORIGINAL PROBLEM BILL
-
the clutch only seems to rattle when warm, originally I thought is was a exhaust baffle rattle, is the clutch bearing the only possible cause. can of worms I expect thanks
-
thanks for that how long does it take I have a 2 post hoist bill
-
hi me again I have a rattly clutch runs ok but annoying any views what it entails to look and replace whatever bearing regards bill
-
well thanks I will certainly investigate prior to engine removal sincere thanks bill
-
hi I have a 68 vitesse done engine up and now there is an oil leak between g/box and engine, is there a synthetic seal instead of using the wooden bits regards bill
-
I have had a look many thanks a bit more confident now regards bill
-
hi I am after a steeirng rack for a 74 3.0 stag or a detailed drawing to recon mine the seals are leaking thanks