JimEB

Thanks Nick 🙂

Hi Mike, I saw these on eBay and grabbed the spec - missed out in the auction though 🙂 Thanks!

Thanks Richard 🙂 Alec - yes, I'm referring to the ones in the injector AND the throttle body 😉

Hey all, Can anyone please confirm the internal diameter and cross-section of the o-rings used in the injectors and throttle bodies? I've seen the following: 4.47mm ID / 1.78mm c/s 17.12mm ID / 2.62mm c/s Thanks! 🙂

Welcome to Triumph ownership  

Well, the engine and gearbox are back in the PI and I'm almost up to a thousand miles... Lots more to do on the drivetrain, with vibes at 60mph (prop/diff nosepiece) and then at higher speeds (possible tired hub/UJs)...

Rapidly coming to the conclusion that I don't have the kit/time to attempt this...

Hello 🙂 I keep reading that rebuilding a rear hub is a job for pros, but I'm sure that folk here must've done it successfully! The left one on my PI feels fine, but is rumbling at high speed... What kit and specific advice would one need? Thanks!

Pimento PIs are the BEST. Temperature gauge now working again, having fitted new sensor...

It must've been a messy divorce... My PI is not yet bring revved hard, but it wants to... Lightened flywheel balanced with crankshaft and clutch, TR5 cam, camshaft bearings...

It's all your fault Nick 😀 Mine has been pressed into action as everyday transport...which it appears to be enjoying...700 odd miles on fresh engine 😉

Earthed and the gauge appears to be fine - thank you 🙂 Sensor shopping now 😀

Hey all 🙂 As per usual, my PI has thrown up a fault the day after the MoT - it has a wicked sense of humour! The temperature gauge was working fine up until yesterday afternoon, now it does not move from beneath Cold. How do I test: - the temperature sender in the thermostat housing? - the temperature gauge whilst in situ? Voltmeter, rev counter and fuel gauge are fine, so I'm assuming it's not the voltage stabiliser. Thank you 😉

Thanks for the info, chaps 🙂

This is exactly why I've just fitted a Wosp starter to my PI... That and the fact that I'm fed up with the Lucas stuff - one even failed on me half way through a MoT test 😀