1967 MkIII
-
Posts
114 -
Joined
-
Last visited
Never
1967 MkIII's Achievements
-
Thanks all for your comments. 7952 wrote:Love the color (colour?). Looks like my intended color. Is that paint code 18 or something else? It's not a Triumph colour but still within the BL family. I tried to match Healey's Ice Blue metallic and Jaguar's blue metallic and got this. It's blue with tinges of silver. Very happy with it.
-
Front suspension goes on again. Engine back in place, and I finally drove Lucy again after 17 long months. I managed to mix up the seats so I had the passenger seat on the driver rails, which left me seated pointing out. Imagine a road corner with camber the wrong the way. Well I first gave her a run up and down (on the mechanic's private road), then burn rubber on a curve and almost threw myself out of the car! One second behind the wheel and I'm smiling Back in my garage at long last That's all pics for now, more to follow along with questions as I try to put the 6 or 7 boxes of parts back inside her :)
-
Loose parts. The windscreen frame & boot frame were done first back in January. Couldn't do much with them except take photos: Boot next, February. Doors, March: At last I could bolt something back together. Door internals except for glass: A few bits I did myself with wire brush in a drill, sandpaper & can of spray: Pedals ready for another 47 years of abuse: Petrol tank
-
My Dad's Panda proves surprisingly versatile, taking bonnet to sprayer: Bonnet primed, sanded, beaten, primed, sanded, beaten..... Worth the effort?
-
Tub being prepped & primed for spray And sprayed: Boot tub:
-
Pics. Engine bay stripped almost bare: Then stripped completely bare: And finally sprayed:
-
Time hasn't allowed me to keep this thread updated as I've been recording progress on the facebook page. All the paid work has now been done: - panel beater replaced rear nearside wing, all wheel arches, boot lower lip. - sprayer just about completed everything but I'm taking the bonnet back as the underside has reacted and bubbled up - engine is back in with new clutch kit, refurbed carbs & some ancillaries, hoses, fuel pump... - lots of £ spent on parts, with my €€'s buying less and less ££ each time :( Now the car is back to me to be put back together again. Some piccies to follow
-
Almost done with the pulling bits apart and soon get to bolt together again. The brake calipers have been roughly painted black at some time in the past, which is now half peeled off through dripped hydraulic fluid etc. In order to refurb them: 1) How much can I dismantle without breaking anything? One side came off easily, the other was a tough pull to get it off the disc. 2) what is worth replacing as amatter of course (got new pads already) 3) can I wire brush the outsides with a drill, and later clean with an air hose 4) then just spray it with a high temp spray, masking off where the pads go Thanks Steve
-
Thanks all for your help, hoping no respray will be needed :) Just realised I don't have the "sound deadening pads"that stick to inside of the door skin. Do these actually do anything? and if yes what material could I use instead? Thanks Steve
-
Thanks all for your help, hoping no respray will be needed :) Just realised I don't have the "sound deadening pads"that stick to inside of the door skin. Do these actually do anything? and if yes what material could I use instead? Thanks Steve
-
This weekend I'll be putting the doors back together after a respray. As I dismantled them a year ago, is there any particular order to fit the parts in? I was thinking - channels - door latch mechanism - window winder mechanism Obviously I want to avoid putting something in place, bleeding knuckles etc only to have to remove it to fit in something else! Feels great to be finally bolting bits together again after a year with the car in bits! Thanks Steve
-
This weekend I'll be putting the doors back together after a respray. As I dismantled them a year ago, is there any particular order to fit the parts in? I was thinking - channels - door latch mechanism - window winder mechanism Obviously I want to avoid putting something in place, bleeding knuckles etc only to have to remove it to fit in something else! Feels great to be finally bolting bits together again after a year with the car in bits! Thanks Steve
-
Excellent thanks all for your help Steve
-
Nick_Jones wrote:No significant differences internally and many have already been "mixed and matched" anyway. - Timing chain is the same for all. - Fuel pump comes in a couple of forms which boil down to "long lever with spacer" and "short lever without spacer". Should be obvious which is fitted and they are interchangeable provided the spacer is added/removed to match. Gaskets are mostly the same. One possible exception is the head gasket. Recessed blocks (later) have gaskets with a tab sticking out at the back which should be visible externally. Non-recessed don't. 1500 is much more likely to be recessed. Nick Thanks Nick, is the spacer external or internal?
-
Richard_B wrote:Which country are you in because the US got the 1500 engine earlier (in the MkIV) due to the emission constraints. Thanks, the car is from the UK, and we're both in Malta enjoying the sun :)