SpitfireAddick
Non-Member-
Posts
30 -
Joined
-
Last visited
Never
Content Type
Forums
Blogs
Events
Downloads
Gallery
Membership & Shop
Everything posted by SpitfireAddick
-
Think I've narrowed it down to the gear stick. When I hear the whirring / vibration, if I hold the gearstick then the noise stops? Does this mean anything? Thanks
- 6 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
It had to happen just after I re carpeted it, didn't it!? . I'll have to take a look into it when I have time but do you think it's wise to drive as it is?
- 6 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
I've recently noticed that a whirring/whining noise comes from around the gearbox tunnel or passenger footwell when I accelerate sometimes. It sounds like a vibration against something sort of thing. Any ideas what it could be? Thanks James
- 6 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
I've recently splashed out a bit of money on getting my carbs cleaned out and had new jets put onto it, I had to wedge the choke cable in for it to work as well as I could but now even when I wedge it the car isn't starting now and I think the carbs are the originals which have done 98000 miles, so I think I may need new ones. Where's the best/cheapest place to buy either new or reconditioned Carbs? Thanks James
- 4 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Got to be honest, I'm not really sure if it's original or not. The dash board trim probably is but not sure about door trim etc. Just need something that stains it a bit 🤔
- 5 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
I'll be putting on a new softtop soon and don't want to ruin it like the current one that's on. This one doesn't have the rear poppers at the top near the window, looks like they were there however. That manual with the pictures look pretty good, I'll give it a go tomorrow thanks
- 10 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
I know this sounds like a pretty simple question but...how do you actually fold the roof down correctly without distorting the plastic windows, and making it flat enough to fit the stowage cover on? I've Googled it but can't really find and in-depth step-to-step guide for doing it? Every time I try it I find either the windows get crushed or the cover doesn't fit over it? Thanks James
- 10 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Hi, In my 1500 I have mainly the plastic/vinyl interior trim. It's faded from black a bit and I have tried a few trim wax's to see if it restored it's colour hut they don't. Is there anything anyone uses that works and will keep my interior trim black? And also the trim on my grill /bumper? Thanks James
- 5 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Just realised it's a Overhaul/Service kit I've got so I'll only be doing that then and see how that pans out. Hopefully that's all it needs. So Where can I get a Carb balancer? I'll post a pic tomorrow when I give it a go at looking at them fully but I'm 95% sure it's not a waxstart.
- 17 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks for all your replies. It's a '79 Spitfire so it has the standard carbs so sounds like it should be sort of straight forward ;D. I'm just praying that it's the last major part/thing that needs doing so I don't have much of a fear of it braking down again. James
- 17 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
1344 wrote:I'd do it myself. In fact I did ! Only take one apart so if you get stuck you can look at the other one to see how it all goes back together Look around on here as there's loads of pictures of folk refurbing their carbs I'm not really that mechanically minded but how long do you think I would be looking at to do it?
- 17 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
I've been having a few issues with starting and idling my Spitfire 1500, took it to the garage and they said I'd need new throttle spindles. Got them fitted by the garage and now they say I could do with a Carburettor rebuilt kit to get it running much better as at the moment the car won't idle atall and always conks out when there's no throttle used, I've bought the rebuild kit and was wondering, as I already have new spindles in it, how easy it is to replace the other parts in the kit or does it have to be done by a garage? Thanks James
- 17 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
9984 wrote:Hi Jsey316 I have two roof frames for a spit, not sure what mks they are, you can have them, if you don't mind collecting from southend, essex Hi Really? Would you be able to box/pack them if I was to send a courier to pick them up? And when you you say 'have'?.... :) James
- 4 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Does anyone know if it's possible to buy individual parts for the roof frame?, as I've noticed I have a part missing. Thanks James
- 4 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
It's just that I've got those little stain circle things that are difficult to get off so I didn't know if normal car shampoo would work. I'll give them a go, cheers
- 8 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
I believe my Spitfire to have chrome bumpers (not Stainless Steel replacement), was wandering if there's any special chrome cleaner that not only cleans the bumper but also leaves a protective layer or something? Does anyone use anything specific? Thanks James
- 8 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
1684 wrote:very easy Excellent 8)
- 5 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
OK thanks, I'll give it a go. I'm replacing the carpets anyway so that's handy. If it is the switch, is it easy to replace?
- 5 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Both of my Reverse lights do not work although the other rear lights all do . After checking the bulbs, one was fine and the other blown, I tested the current to the bulbs and there wasn't any. So the only thing I can think of is a faulty switch?! Where abouts is the Reverse switch located in the gearbox? Is it easy to look at and fix the issue? Thanks James
- 5 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Yeah I've had a look at the pen option, I can't imagine it's exactly easy to do especially when you have the artistic skills of a Potato :'(... And the fact people say it wares off quickly too. Yeah I only have cheap 'Avon' tyres at the moment so it won't look too classy ??) Looking at that photo in the link, it doesn't actually look too bad there in my opinion. I'll check that website out, thanks. James
- 8 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Hi, Has anyone tried putting tyres with 'White Letters' (Like the one below), on their Spitfire? Does/ will they suit the car? Where's the best place to buy these sort of tyres or any other alternative? Thanks James
- 8 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
6485 wrote:How about using something like these: http://www.narva.com.au/pressreleases/press-releases/narva-sets-new-standard-with-second-generation-truck-lite-led-headlamp Yeah I'll look in to getting the others or the ones you've posted, cheers
- 15 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Sounds good then, does it use the same power as the standard do you know?
- 15 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
FloydP wrote:They sound like the ones I fitted to mind, same as fitted to Land Rover defenders. Here's where mine came from:- http://www.paddockspares.com/pm678-wipac-crystal-halogen-headlamp-conversion-kit-pair-left-hand-dip-uk-and-australia.html And these would fit a Spitfire 1500? Is it just headlights and no sidelights?
- 15 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
490 wrote:Just confirmed they’re Wipac - clear glass lenses with all the beam pattern coming from the reflector behind, so no light-loss through the glass. These are fitted to my GT6 and are superb. Straight swap for spitfire fittings too? Where did you get all the lights etc from?
- 15 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with: