Davemate

I have posted this on the Facebook group but just incase there are folk who don’t use Facebook. Would it be possible to have a marshal of some description at lands end to stop people parking their cars in the “lands end” entrance. Over the last few events when we’ve arrived at lands end there has been 3 cars parked which completely stops anyone else from getting a picture of their cars under the sign without having the “other cars” in it 🤨 Seems a bit inconsiderate to just park their and then go in for breakfast when there’s a bloody great big car park 50ft away, knowing that there’s 130 (ish) other cars who would like to get a picture 👍 Good luck to everyone this year, hopefully no dropouts on the way round 😊 the head marshal at lands end has replied on Facebook saying if he can spare a marshal then he will be on it, but if we all keep an eye out and see someone walking away from their car and it’s parked at the entrance it would be nice if something was said that way it takes the heat off the marshals obviously if everyone just takes their picture and then parks up then there won’t be an issue 😊

Seems I’ve managed to get the file/map route onto a pc (base camp) but just doesn’t seem to want to show itself on the sat nav 🤨 will try again tomorrow eve 😊 update route is now on sat nav 😊

Thank you Howard I may well contact you

I have only looked while on my iPhone I’ll have a look on my sons pc as I only use my phone

As I can’t respond via the watts-app all I’m getting is basically a picture of the coding for the sat nav file, not a downloadable “file” to then transfer onto the sat nav. unless someone knows or explain how I do it

Thanks for the replies 😊

Has anyone done the sat nav files this year, there’s normally someone doing them 😊

If your just taking out the engine from the top you can leave the following in place the brake lines the steering all the front suspension Most of the exhaust Not quite getting why you seem to think so much has to be disconnected/ removed to get the engine out from the top. ive taken the engines out of two cars then swapped them over, put them both back in and got one running in a day and drove it home. went back the second to finish off then drive that one home basically swapped a 2.5 and a 2ltr over.

You can remove the engine on its own from the top you can remove the engine and the gearbox connected from the top you have to loosen the bolts on the crossmember then “bounce” the car which will drop the crossmember a little which will let the sump ride over the crossmember. ive only ever removed engines from the top

In no particular order   Lands end:- my one main niggle about the whole event  We arrived at lands end to find half a dozen cars parked in a nice “fan” at the entrance, so that meant that no one was able to “get a photo” of their cars parked at the entrance  quote thoughtless of those people,a case of I’m here,I’ll get my picture and sod everyone else. this never happen at JOG as the picture taking point is more than a walk from the hotel  how about a “parking attendant” next time  take you picture and then move into the car park    Other observations knock hill:- if you use it again how about seeing if a local “burger van” would be interested in parking there for the night,I would think he’d do a booming trade in tea,coffees and burgers    sweeper:- cant thank Doug enough,getting us back to the start to enable us to “re start” in my car otherwise we would have been out  maybe set a “max time allowed” to help at each brake down.   last checkpoint:- did seem a bit “out of the way” in the wrong direction 

I did try the email and it bounced back as well which is why I asked for a phone call  so far no reply,so I presume I’m out of luck

Is this still available,I’ve been looking for throttle bodies to use for efi conversion,and I don’t wont to use serviceable ones so these would be perfect. I can’t PM you for some reason so if you’d be kind enough to cal and let me know,I live in cheshunt so I can pop up anytime to pay and collect them  07779 237 536  Dave 

To be honest I didn’t think about my answers to hard It also slipped my mind that there are three wires on the foot switch 1) must be a constant feed or earth,mk1’s are wired weird 2) off to dip beam circuit 3) off to main beam circuit Sorry to have raised your hopes   Can’t think of anything other than my “other suggestions” which all involve removing the foot switch

You only need to extend one wire over to a dash switch Unplug one of the wires from the foot switch and extend it to a dash switch then return a new wire back from the dash switch back to the foot switch Result :- Both switches have to be on for the main beam to work but once on if your foot is to busy then flick the dash switch and the main beam goes off Other options:- 1)Use the overdrive lever for main beam and add an overdrive switch to the gear knob so doing away with the foot switch 2) just do away with foot switch and just have a dash switch 3) leave it as it is and just live with it 4)extend foot switch wires and an coiled wire to a switch on the steering wheel

How about winding in a tiny self tapping screw into the pinhole then grind the shank from inside the reservoir or just leave it sticking out Or grind both the sticking out bit and also the head Or Is it possible to sleeve it