iggy

glang this gearbox didnt come out of my car i did a swap for it, also my cars not on the lucas injection system the previous owner removed it

yeah it seems like its from a mk2 according to the 2000 register, probly some one cleaned up the area its stamped not filed it down,

ok didnt realise they were all hand stamped, i think possibly the original number stamped has been filed down and re stamped as it looks shiney compaired to the rest, agree with the ratio's only really slight differences

could well be, the mk7211 number is hand stamped and looks  to new for an original marking,

Colin it was removed from a saloon il look to see if it has the bulge somewere

yes the number is mk7211 looks to me hand stamped

I have a J type overdrive box with 21A76 stamped on the near side boss where the cross shaft arm is, on the opposite side on the casing is the raised numbers 8830681286, can any one identify this gearbox thanks

Fit all the new bush's centrally should be ok then,

my 2500 saloon had the same problem with no slack in drive shafts or prop new uj's all round new poly bushs on trailing arms and diff mount, replaced the bevel and thrust washers in the diff chris witor sells these washers in various sizes,

ok thanks for your help il let you no the out come🙂

ive read that page again and in the paragraph close ratio gears above the ratio chart he's refering to the ways of obtaining a close ratio gear set for a tr6 box, he then say's the readily available sprint gear set for 600 dollers to me this means cause its a readily available standard sprint box easy to aquire rather than paying out alot more for specialist gear sets in the chart below,

glang if you look at the first link you sent me the sprint gearbox ratios are there in the ratio chart, moss europe and rimmers sell close ratio gear sets for the Tr6 gearbox which are exactly the same as the standard sprint gearbox 1st 2.19:1  2nd 1.57:1 3rd 1.23:1 4th 1:1

Pipercross are selling 5ltrs valvoline 20/50 vr1 on ebay at the momment £30.99p free postage

thanks for the info Colin i no what to look for now, looked at that box on ebay and id prefer an overdrive box plus im based in wickford essex,

Yes stonleigh is a good idea, id be happy with £250 as well,Yes the cross shaft pins do go fairly often, the box in my car has a roll pin added and seems good so far, how do i identify a proper sprint box? i  presume there will be specific part numbers on the casing?

would be very tight i think,best get a sprint box really, should be able to find one, just takes time

Yes that would improve the gearing, speedo wouldn't matter to me i have a snooper my speed fitted buy already got 15" rims fitted woudn't want to go any larger 🙂

picture of my mk2 saloon as ive not posted on the forum for a long time

yes i have the 3.45 diff and 1st is pretty useless infact the gearbox really lets the rest of the car down untill you get into 3rd gear, although its one of the quietest smoothest triumph box's ive used or owned its an uprated strong A type overdrive box i bought from Tony lyndsey dean a couple of years ago unfortunatly  didnt look into the changing the ratio's before i bought it  im sure Tony could have sorted it for me  had i known,

Sounds good Colin, Radders did tell me your tr6 came with a sprint box fitted he said it pulls really well in second gear, il be looking for a sprint gearbox now might have to take drive up to ixworth

Thats very good bit of information thanks again glang, just 10 mins ago i found a close ratio tr6 gear set for sale on moss triumph web site, weather there gear sets are good quality or not i dont no but the ratios are exactly the same as the dolomite sprint ratios given in  the chart on the web site above, it seems even the early or late tr6 gearbox's have slightly taller gearing than the standard saloon box's. the reason im looking into this is my engine produces a fair bit more torque and bhp than standard and i find 2nd gear pretty much hopeless if im giving it some throttle

Ok thanks glang need to find out for definite the sprint ratios, i no the sprint has 3.45 diff ratio for manual box's

Has the dolomite sprint manual gearbox got a longer second gear compaired to the saloon gearboxs? can i transfer parts from the sprint box into a saloon box if it has? or is there any where i can buy parts to achive the longer second gear ive read there was a leyland stn002 kit available years ago, thanks

ive got the witor extractor manifold fitted to my mk2 saloon with power steering and theres 15 to 20mm clearance no problems with it, could you lever over the offending power steering pipe to give more clearance? 

  thats stange so how do you get your radiator out what happen to the original mounting points for your rad