foshi
-
Posts
87 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Blogs
Events
Downloads
Gallery
Membership & Shop
Everything posted by foshi
-
clive done the stat, plastic fan ,timing done flushed rad , next will try flushing the block
-
having just acquired my next project , have been going over it, today i found if left running for 30 minutes it boils up no oil in water no water in oil ,think could be rad has a dolomite 1500 engine the rad is stock 1200 herald the car is a herald saloon. is the 1200 rad up to the job or should i replace . not flushed the block yet next job .paul
-
needs a bit of work shame to cut it up where will you find another good to keep for a spare . paul
-
Herald 13/60 convertible large items available - can maybe deliver
foshi replied to Adrian Girling's topic in Parts For Sale
hi are the rear wings any good paul -
a late herald one for sale on ebay will be the same as the 1600 and mk1 vitesse
-
a late herald one for sale on ebay will be the same as the 1600 and mk1 vitesse
-
looking at it today i think you are right rob
-
hi bonnet refitting on my vitesse , the car came to me dismantled so is it best to refit the valance and over riders first then the bonnet or other way round cheers paul
-
just done it definitely worth doing body off, took me around a day body on to replace the lot inc cylinders and bleeding.
-
I don't think anything being discussed should need any cutting off - just a few bolts undone. The frame is held by the four bolts through the rear of the boot lid and the four that attach the hinges. The support bracket is held by two of the four bolts at the back. was thinking of the bit that fits to the inner wing , do know the part that connects to the boot brace is bolted may have one if required
-
can see if the one on my parts car is good and cut off, sure i have some support stays
-
-
correct steel. do i seal or not workshop manual states you do my feeling is no paul.
-
need to replace the head gasket on my 1600 vitesse ,workshop manual states apply a suitable sealant to top of block before fitting gasket thoughts please paul.
-
think you mean the filler hole , you need to get it up in the air level if possible then drain and refill .
-
may help someone, diff the same rear spring the same if convertible only , front springs different discs the same
-
some on ebay at the moment
-
the front brakes are type 12 on the 1600 , front springs slightly uprated rear the same , have welded the bonnet and rad fittings on not .sure if the diff is the same though .
-
hi have a very good 1966 herald rolling chassis with rebuilt brakes and suspension disc brakes fitted. my plan is to remove the body from my 1600 vitesse onto the herald chassis ,what parts will i need to swop obviously will be fitting the 1600 engine non overdrive box i believe the diff and rear spring are the same input welcome please.the vitesse is a 1965
-
ok you may need more panel parts then let me know
-
will be ok for that ,would be a bit awkward to form the mouldings ect if you can wait would be better to cut out the part and send to you paul
-
ok think that part is ok will check on saturday and let you know had a look , prod with a screwdriver not that good sorry paul
-
ok think that part is ok will check on saturday and let you know
-
hi if you can post a picture of what you need can check mine is ok paul
-
if your not in a rush can cut the section out of my spares car for you