Jump to content

Triumphstuff

Non-Member
 View Profile  See their activity

  • Posts

    16

  • Joined

  • Last visited

    Never

 Content Type 

Everything posted by Triumphstuff

  1. Triumphstuff
    Thats interesting..  the revington ones are listed as spit as well as TR...  Differant stub axle..  ????? Kerching.. £70 .. From revington. TR enterprises £42 +vat there is a good picture here    http://www.triumphspecialtuning.com/index.php?route=product/product&path=40&product_id=87 which shows how they would go on the 2000/stag.. James
  2. Triumphstuff
    Ferny.. The nearest thing to herald bearings is the TR 2 to 6 fronts. They use exactly the same bearing as herald, spit.. TR enterprises sell the ones for the TRs.. I would imagine that like the 2000 spacers to GT6 ...  that the TR to Herald will be slightly too long.. BUT... too long is good, you can lathe them down to suit your hub.. I was thinking of producing the Herald/spit spacers..... But i can only deal with a few projects at a time..   James
  3. Triumphstuff
    The new replacment slave cylinders are slightly shorter than the originals.. If you put 3 or 4 washers on each of the 2 bolts between the cylinder and the bracket.. The piston should be about an inch down the bore.. The push rod should go on the top hole i believe..   James.
  4. Triumphstuff

    stub axles

    Triumphstuff replied to StagNL's topic in Drivetrain

    Sadly these  http://www.ebay.co.uk/itm/140900713470?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 will not fit Vitesse or GT6.. The spacing between the bearings is differant..    James
×
×
  • Create New...