1300dolly
-
Posts
29 -
Joined
-
Last visited
Never
Content Type
Forums
Blogs
Events
Downloads
Gallery
Membership & Shop
Everything posted by 1300dolly
-
Should be sealed beam but may have been changed in the past, yes the same as Minis as is the headlight bowl and rim.
-
I only use Payen, check on Ebay they often appear there.
-
did you check dizzy cap and that you had a spark from the HT leads onto the plugs , have you changed the points and condenser?
-
I would fit a thermostat switch so it comes on at a set temp, you say the car doesn't overheat but it might be getting too hot.
-
Cut a hole in the gearbox tunnel then fit a plate over the top with self taper so next time you have to bleed the clutch or fiddle with the slave its a 10 minute job. Have a look on the TDC forum someone on there will be able to tell you where to cut to get it perfect.
-
Moss Europe sell them.
-
Sorry I didn't realise it was you posting the question. Give Mick Dolphin a try.
-
Your local car accessory shop should have one, hell even Halfords sell them or canleys, Mick Dolphin, Rarebits4classics. just make sure you get one with a non return valve.
-
With a car cover you need to take if off at least once a week to let it air and get rid of the damp that condenses inside the cover so in my mind all but the most expensive covers are a waste of time, I have just purchased a half cover for the spit but only to keep the rain from getting into the cabin.
-
With a car cover you need to take if off at least once a week to let it air and get rid of the damp that condenses inside the cover so in my mind all but the most expensive covers are a waste of time, I have just purchased a half cover for the spit but only to keep the rain from getting into the cabin.