system6
-
Posts
97 -
Joined
-
Last visited
Never
Content Type
Forums
Blogs
Events
Downloads
Gallery
Membership & Shop
Everything posted by system6
-
DJW.....is correct on what he,s saying ..had the same problem with my gt6.....what i did was to give te peddle some whelly...short sharp heavy presses of peddle until slave piston is free to move.......
-
Thanks for the reply...i,m not the only one with this problem .....hav,nt been to a show yet . I,ll check out the other gt6,s then... .cheers S
-
Thanks for the reply...i,m not the only one with this problem .....hav,nt been to a show yet . I,ll check out the other gt6,s then... .cheers S
-
Ken....I had to cut mine length ways where the1/4 light starts and finnish,s to get it in thats the bit i,m not happy with, ...also i,m sure when i removed the original seal it wrapped around the front of the 1/4 light and sat in a slot in the door and also a slot in the door the other end above the door lock....when body work was done as part of the resto those slots are there and look a bit odd nothing in them.....has any one else got the dame problem? cheers S
-
Ken....I had to cut mine length ways where the1/4 light starts and finnish,s to get it in thats the bit i,m not happy with, ...also i,m sure when i removed the original seal it wrapped around the front of the 1/4 light and sat in a slot in the door and also a slot in the door the other end above the door lock....when body work was done as part of the resto those slots are there and look a bit odd nothing in them.....has any one else got the dame problem? cheers S
-
hi ...oh... i brought mine from canleys and came as one length of seal which i had to trim to fit around the 1/4 light....there were no mouldings on what they sent me.......is every gt6's outer door seal the same having to trim it your self to fit ....nothing out there pre-formed/moulded to fit straight in 🤔 cheers S
-
hi ...oh... i brought mine from canleys and came as one length of seal which i had to trim to fit around the 1/4 light....there were no mouldings on what they sent me.......is every gt6's outer door seal the same having to trim it your self to fit ....nothing out there pre-formed/moulded to fit straight in 🤔 cheers S
-
Stevegt Who,s/what,s....CC,s........ Thanks S
-
Stevegt Who,s/what,s....CC,s........ Thanks S
-
Hi all Just wondering were,s the best place to get the door glass outer seal from . I,ve completed my resto and bought the seals from canleys but i had to cut them to fit and does not look the best...can you buy them pre-formed Cheers all S
-
Hi all Just wondering were,s the best place to get the door glass outer seal from . I,ve completed my resto and bought the seals from canleys but i had to cut them to fit and does not look the best...can you buy them pre-formed Cheers all S
-
Hi This morning carried out the ..DIMPLE method took car for a 20 mile drive also over some bumpy ground nd hey-presto ...latch did not pop open... Cheers all S
-
Body catch on my car is as low as it can go...don,t really want to elongate holes in catch....at the moment its looking like i might go for ...Nangs sugestion... Cheers S
-
Thanks... but would,t thay move the latch lower .makin the latch looser... can,t get my head round it at he moment......i,ll keep trying though Cheers S
-
Cheers nick Yes i know they expensive the rollers on mine have flats and don,t turn freely , and bore worn , ...the chrome on mine are good so don,t want to fork out that amont of money S
-
Esxefi Any chance of photo?... can,t undertand where to grind the dimple Cheers S
-
Thanks Nang they should do the job....anyone elsee out who,s tried them S
-
Thanks for the offer.....its chrome.....i,ll PM you if i,m desperate.... do you think its the spring thats lost its spring-iness....it sp can you buy new springs Cheers S
-
What are you worried about?....not sure what the psi should be in a spit but 200psi sounds good to me S
-
Hi all I have a driver side bonnet latch that keeps popping open, .....they are the originals , so spring and hook and linkage are worn , the bonnet fits really good with ok gaps all round, i don,t want to bend the bracket that the latch clips under , when bonnet down.....any ideas appreciated Thanks all S
-
Hi I had a listen...the only thing i thought is ...could it be the timing chain rattling?....but that does not explain it running badly i suppose ,unless the timing sprockets are out when you re built the engine? Cheers S
-
Hi Use a good contact adhesive (evostick), to clean old glue use autoglym intensive tar remover, brillient stuff! cheers S
-
Hi all.......thanks for the replies......powder coating it is then now the color.....black silver or the cars color green.....? B-)
-
Hi Is it a good idea/any probs to powder coat my gt6's rocker cover Thanks all in advance
-
Hi....(sorry to ask a question on Markcro's thread).... I've fitted a ballast resistor (gt6 mk3)...one wire to the coil and another to the ignition switch....car runs great!!...the only problem i have is the spark plugs are getting very hot and the core is very white indicating over-heating... could this be caused by the ballast resistor in-correctly wired ?.. , also... i'm not sure what voltage the coil is on the car 6 volt or 12 volt , ...any advice geatly appreciated...but please keep it simple as i'm not to good with electrics.... Thanks