frenchiemk2

incredible price don't you think?

I found time to test this and yes there's a rev fluctuations at 1-2 and 3-4 injection inlets I tightened the studs but no change... The gasket is new but did I di something wrong? And should it work with seal paste?

Triumph année 1971. Première main ayant appartenu à l'ambassadeur du Japon à Lisbonne. Option gentes allu dunlop et overdrive. Voiture très propre, pas de corrosion, qui à toujours dormi au garage. 40000km. Prix 18000€ à débattre devant le véhicule. 2000 Triumph Estate near Orleans France. 1971 1st owner was Japanese ambassador at Lisbon. Dunlop Alloys and overdrive. Very clean, no rust, always slept in a garage, 40.000 Km, 18.000 € ONO https://www.leboncoin.fr/voitures/2329030256.htm

I swapped engine 🫡

Hi, something weird about the engine running. I suspect the Inlet Exhaust Gasket (which is new) to create any leak : - Engine starts fine with choke and runs fine since it's low rpm (1000 how i set it). - when cold and warms revs fine - when hot, can't rev and about to die out or when can hardly rev, not turning fine and bangs sometimes Any ideas?

soon...

Soon on breakes renewal on my Pi 72. Are there many refs for rear breake cylinders or specific? I found those in France https://www.betaset.fr/freinage/10914-cylindre-de-roue-triumph-2000-mk2.html Thanks

water thermostat replacement today. Seems to work fine.

smells like 15" alloys soon 😋

Done today, bicycle breakes cable, all in place before rain 😬

found "how to"... just "have to do" the repair now...

Only Triumph on the rallye we re doing today. French Gotti wheels of course.

OMG as my Pi shall start fine, new issue... choke cable broke/cut... Any idea how to dissemble the cable pull from inside the car?

News... I unscrewed this gauge and made it work again even if the shell is broken. At ignition it indicates 7.5-8 😀bar wich is correct equivalent 110psi and engine running it's about 6.5-7 (but once again no 100% trust in this gauge fir domestic use...) I removed the new f....g HP pump too noisy and leaking at the inlet (wtf really) and put back the real Bosch that was on the car at 1st... What a waiste.🙄 I whish it's the final mount.

😂

Too many things at the moment for my Pi as i plan to get it ready for the C.T (french MOT). File for collection cars document done . Waiting for answer Carte griae collection So in order to pass the C.T breakes, fuel and emissions, tires... Starts and drives. Leather interior renewed. Still issues with fuel pressure/pump, alternator since yesterday, breakes inoperant at the rear and maybe an air leak between downpipe and exhaust line. Many little things to control and to fix like transmission leak... Bushes and arms...

Carpet Diem said Horace... nice blue

it's 3 to 4.5 at idle, didn't see at rev but the gauge is bery old and i don't trust it I just tried to drive 1st gear and rear, the engine ran and didn't cut.. some ki,d of nice, but still some bangs and rattles ( i think there's an air leak between down pipe and main line...)

Yesterday dealing with fuel pump Looks better but : new high pressure pump making much noise + heating + still exuding at the back which i don't understand because it should be sucking and not pulsing and also because huge bolt is tightened at max... Defect pump? The car is starting but hard to rev... Like stalling whereas the idling is fine. Not enough fuel pressure?

Stage 2 completed. 3.5l neatsfoot oil spread. Close to saturation but according to natural non homogeneous material, small areas are still a bit harsh. Seem a bit shiny just because i just used a cloth uniformly and hasn't penetrated fully. Final step is nourishing cream to make the surface softer and pleasant under touch. I'll make 3-4 pictures process when done.

John, if you need help or anything in France, feel free to ask. A bit far from Le Mans to help (250Km south). I advise you to get familiar with common words of the semantic field of cars/engine race with youtubes videos in french + auto translate. But don't forget most french have learnt english enventough they have difficulties to understand or speak, mainly because of accents and speed of speech. Speak slowly is the key. Maybe old educational and formative bords and also those online documents

Well the Gendarmes are military, under Armies ministry and it's true that they're mostly deployed in rural areas, but also the only ones on higways (with tolls) and also in urban areas with PSIG and airfields or portuar areas.

3.5 liters later, leather still absorbing the oil...🤔 I now make double pass one after another in continuous time. Pict at the end of one process... Very oily but not for long.🙄

What the... I was checking all bolts to ensure no air leak... 🙄 I still have to adjust cold start from the metering unit with choke. Something to work on...

Thanks. That may be true. At least 15 years with no care. I ordered cheaper oil yesterday (2.5l) because after 1l the front seats are close to be nourished, but rear ones are still rough and dry.