Scuttle to chassis two front bolts

[Neilriser]

Hi all,i am about to start a full body alignment,and have read all info supplied of bolting /rubber washer positions but i am still unsure on the two front scuttle bolts,when i dismantled my body at the start of the project there where rubber washers at these two positions which i believe to be wrong? i know the scuttle is the important item and want to get this right from the start please any one know what should be at these two positions? i am fine with all other locations.Regards Neil

[standardthread]

On the Heralds/Vitesses I have dismantled over the years there have been rubber washers between the 'towers' on the bulkhead and chassis with the bolt going through the closure for the tower in to a captive nut inside the front outrigger.