jamie31888
Expired Member-
Posts
219 -
Joined
-
Last visited
Never
Content Type
Forums
Blogs
Events
Downloads
Gallery
Membership & Shop
Everything posted by jamie31888
-
Hi Jason, I'm running a Bosch S4 063 battery on my Mk3 Spitfire and its been perfect, highly recommended, it also comes with a 4 year guarantee. £39.00 Delivered if you use discount code "CLUB2008OC" http://www.eurocarparts.com/ec.....37&0&cc5_993 Regards Jamie
- 4 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Hi All, Problem finally solved 🙂 It turns out my brake master cylinder bracket was incorrect as previously suggested. I purchased the correct bracket (Part No 146413) which has a shallower angle and a hole in each side. My bracket had no holes in the sides and was the same angle as the clutch bracket, causing the reservoir to sit too high. When the new bracket was fitted along with this 0.625" brake master cylinder the clearance is as it should be. http://race.parts/Catalogue/Br.....ral-Master-Cylinders I had to remove the push rod from the old master cylinder and fit it to the new one which was a 5 second job. Just a case of removing a circlip, greasing and refitting. Thanks for everyone's help on this, no more reservoir rubbing on the bonnet 😎 Jamie
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks for the advice Jens , I think that's what I'm going to do, not too keen on the idea of using another clutch M/C with a small reservoir.
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks Harry, that's exactly the master cylinder i'm after! It looks to be an original type, here is a photo I took from the owners handbook. Is there a part number on the casting at all? Jamie.
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Hi Harry, Those all seem to be clutch master cylinders with the smaller reservoirs? Any chance you could post a picture up of your set up? Cheers, Jamie
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Another similar picture 🤔
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
I've found a few pictures like the one below. The M/C is a metal reservoir one, the brackets are at the same angle as mine. I just cant find anywhere selling that particular M/C which seems to be the right one.
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Cheers Danny, I notice your brake master cylinder bracket is more angled towards the car. That must reduce the height a bit. I wonder if that bracket would work on a mk3 aswell as a 1500...
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks for the replies all, I had a look in the Mk3 owners manual. There is a picture of the master cylinders. The Master cylinder shown in the picture looks similar to this one, but at £120 its not cheap.... Is there any risk in using another clutch master cylinder?
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks for the replies all, Can anyone please post a link to the right master cylinder? The one fitted at the moment is a GMC224 and I know the GMC220 also doesn't fit from previous experience (see picture below). Which master cylinder are you guys using on your mk3's? Jamie
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Hi Guys, Having some issues with my brake master cylinder fouling the bonnet. I have witness / rubbing marks where the bonnet rests on the reservoir 😲 Can anyone post up some pictures of theirs so I can see where i'm going wrong? Cheers! Jamie
- 29 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks for the advice guys!
- 9 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks all will try the AAT's and try to locate some yellow springs. Air filters are the skinny type, what other options are there?
- 9 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Hi Guys, Its been a while since I last posted on here, but I need some help with carb needles/performance. Im currently running the standard "BO" needles, these are the fixed type not sprung loaded. I have no problems with the current setup but wanted to know if I could improve performance with a different needle? The car is a 1970 mk3 O/D. Standard HS2's Full stainless sytem (extractor manifold and twin exhaust) Pancake filters. Thanks For your help! Jamie
- 9 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks Hugh , glad the thread has helped!
- 54 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
When I refurbished my mk3 seats i purchased allot of the parts from james paddocks . The foams etc are quite a bit cheaper and I think paddocks are supplied by newtons anyway ! This link might help http://club.triumph.org.uk/cgi-bin/forum10/Blah.pl?m-1369041183/s-0/ Cheers Jamie
- 11 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Cheers Colin , I didn't really want to resort to using rimmers , but on this ocassion it looks like I'll have to . Jamie
- 3 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Hi All, Can anyone tell me what the correct hood bag for late 1970 mk3 spit is? Trying to order one but there are so many variants. Is there a difference between mk iv and mk3 ones? Cheers Jamie
- 3 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Found this online today, it seems to change everywhere i look :-/
- 11 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Hi All, Could anyone please tell me which is the correct way to install the door handles on a mk3 spit? Cant seem to find a definitive answer.. :-/ Thanks Jamie
- 11 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Cheers Alex , think I'll go without then.
- 5 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks guys that's what I thought , it's just it was mentioned on one of the hood install guides online .
- 5 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Hi all, Is sticking self adhesive Velcro loop tape to the hood frame a good idea? Does it make much of a difference ? Jamie
- 5 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Completely agree with the tiger seal, also keep any water out. I carefully placed some weights wrapped in cloth on the trims overnight , works great.
- 10 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with:
-
Thanks Wim that shows exactly where the tab fastens :)
- 6 replies
-
- Legacy Forum Import
- GT6
-
(and 1 more)
Tagged with: