Adrianb Posted August 4, 2021 Share Posted August 4, 2021 Hi, I am replacing the complete windscreen surround as the existing one resembles lace curtain! Before someone says don’t cut it off! Too late! So I now have a new surround and bulkhead to weld together my concern is when I weld around the outside of the base of the surround then clean up the weld I potentially weaken the join as I can’t do any work on the rear of the welds.Any suggestions,thank you. Quote Link to comment Share on other sites More sharing options...
ferny Posted August 4, 2021 Share Posted August 4, 2021 If you leave a gap for the weld to fill you should be fine. You can also knock the welds back before dressing and then skim with filler. It's no different to doing a butt weld anywhere else Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.