Sidewaysste Posted June 6, 2014 Share Posted June 6, 2014 AS per the title really. I'm trying to fit my alternator and it didn't have any spacers with it so I'm trying to line it up with the other pulleys. Also the wiring loom seems far too short to reach either the back of the alternator or the temp sender. I'm assuming it is routed incorrectly. Would one of you fantastic people mind posting up some pics of your wiring too?Thanks in advance :) Quote Link to comment Share on other sites More sharing options...
1300_wales Posted June 6, 2014 Share Posted June 6, 2014 There are some pics of my engine bay on Flickr here: https://flic.kr/p/nSMAG8My wiring is a bit of a mess around the alternator thoughMike. Quote Link to comment Share on other sites More sharing options...
stevegt6 Posted June 7, 2014 Share Posted June 7, 2014 Is it GT6...? - yes it is....just noticed earlier post... Will do photo and measure length of spacer - give me a short while... Quote Link to comment Share on other sites More sharing options...
Sidewaysste Posted June 7, 2014 Author Share Posted June 7, 2014 Thankyou both! :) Quote Link to comment Share on other sites More sharing options...
stevegt6 Posted June 8, 2014 Share Posted June 8, 2014 sorry for delay.....a few technical issues..Spacer length i have (mk3 gt6) with CC's alloy mount bracket is 35mm - will post pic as soon can Quote Link to comment Share on other sites More sharing options...
Sidewaysste Posted June 10, 2014 Author Share Posted June 10, 2014 Thankyou! I made a spacer out of a bit of steel tube and 27mm seemed to do the trick on an iron mount.. Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.