Alan Armstrong Posted February 19, 2023 Share Posted February 19, 2023 Good afternooon all... Much achieved on the Herald this afternoon...butv once again a problem needs solving. Please see image below As you can see new pump fitted..no connecting pipes on yet, but as you can see the outlet pipe is heading directly into the block. So before I cause myself more problems, can I undo the screw on the top and rotate the body round so to access the pipe away from the engine? Thanks for the tips KR Alan Quote Link to comment Share on other sites More sharing options...
glang Posted February 19, 2023 Share Posted February 19, 2023 Think the outlet pipe is meant to run along the side of the block but if you dont want that you have to undo the 5 screws at the base to move the body round 72º. That centre screw only releases the top cover that has the filter underneath which should be inspected periodically. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.