Saltddirk
-
Posts
612 -
Joined
-
Last visited
-
Days Won
2
Content Type
Forums
Blogs
Events
Downloads
Gallery
Membership & Shop
Everything posted by Saltddirk
-
on the ramp now for finishing
-
on the ramp now for finishing
-
checking exhaust alignment
-
checking exhaust alignment
-
set
-
set
-
gently lowering
-
gently lowering
-
Big day yesterday, Body and chassis are reunited
-
Big day yesterday, Body and chassis are reunited
-
but not before this filter goes to the bin where it belongs. What?.... Because it is old of course.... Only politiacally correct statements here ;D
-
but not before this filter goes to the bin where it belongs. What?.... Because it is old of course.... Only politiacally correct statements here 😀
-
final result and shaun started dreaming of the 10CR
-
final result and shaun started dreaming of the 10CR
-
yesterday progress, Chassis is now on it's wheels. Thanks to Shaun and his dad's help the engine, gearbox and propshaft are in.
-
yesterday progress, Chassis is now on it's wheels. Thanks to Shaun and his dad's help the engine, gearbox and propshaft are in.
-
nothing there I'm afraid....(ondrugs)(funny)
-
nothing there I'm afraid....(ondrugs)(funny)
-
Have also been , quite a bit, touching up the inside of the body shell, when they sprayed they never took much care to work around the shadows created by the spraygun. 2 afternoons with a little mirror and a brush saw these covered. The one door with silicone contamination has been resprayed and looked much better
-
Have also been , quite a bit, touching up the inside of the body shell, when they sprayed they never took much care to work around the shadows created by the spraygun. 2 afternoons with a little mirror and a brush saw these covered. The one door with silicone contamination has been resprayed and looked much better
-
it looks as is they are still touching, but that's because not bolted down fully. on one of the calipers I had also to straighten the mounting surface of the bolts. I had a hell of a time ( actually most of the afternoon) to try and fit the dust jacket on on of the pistons, the retaining clip kept popping loose... But then there is no groove for it to sit in.. grrr. Must be a skill I dont master,,,,
-
it looks as is they are still touching, but that's because not bolted down fully. on one of the calipers I had also to straighten the mounting surface of the bolts. I had a hell of a time ( actually most of the afternoon) to try and fit the dust jacket on on of the pistons, the retaining clip kept popping loose... But then there is no groove for it to sit in.. grrr. Must be a skill I dont master,,,,
-
and modified. I also grinded a flat on the caliper, which could have done with a bit of finishing to start with
-
and modified. I also grinded a flat on the caliper, which could have done with a bit of finishing to start with
-
The new calipers and disks arrived, so have been modifying the hubs to make them fit. The original profile