moosetvr Posted October 9, 2007 Share Posted October 9, 2007 Have searched the past posts but cannot really find the answer I am looking for.I have found a cheap set of 15 x 6 minilite wheels that are made to fit an MGB. I belive the stud PCD is the same, and have found that MGB V8 alloys also fit the Saloons fine.Question is will these wheels fit my MkII 2.5 PI fine with the correct offsets (are they the same? ) etc so the car drives the same and the wheels do not foul the arches??? Link to comment Share on other sites More sharing options...
AlanChatterton Posted October 9, 2007 Share Posted October 9, 2007 Yes, they should.MGB LE alloys are the same as Stag/S alloys but the centre face is a bit wider to allow for the rear bearings (bigger on a MGT)So, they should fit and not foul anything.............Note, should! Link to comment Share on other sites More sharing options...
Deleted User Posted October 9, 2007 Share Posted October 9, 2007 Does Austin stuff not have 100mm PCD? Link to comment Share on other sites More sharing options...
Deleted User Posted October 9, 2007 Share Posted October 9, 2007 Austin 1100/1300 etc has a 4.5" PCD and a MONSTER offset. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.