Hobie21 Posted June 25, 2012 Share Posted June 25, 2012 I am getting around to sorting out the clutch, I need a new master and slave cylinders, on order. When I took of the salve cylinder off I found a what I would describe as a rod with a bolt on the end sticking out of the bell housing. See attached image, (I don't how to in-bed an image and I'm sorry for the poor quality of the pic).Can any one tell me if that what I should see, it looks a bit Heath Robinson to me. Link to comment Share on other sites More sharing options...
herald948 Posted June 25, 2012 Share Posted June 25, 2012 Does that rod match up at all with #23 in this diagram? (from the Canley Classics web site)Do you have any of the other parts #24-30 as well? It all had to do with clutch adjustment, but the bits were dropped by the time of the Herald 1200 if not well before. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.