supaman1 Posted August 31, 2011 Share Posted August 31, 2011 hi guys new to this anybody out there with any help i have put a 2 ltr ford zetec engine in my herald with mt75 gearbox engine and gearbox in spitfire swing spring and spitty roll bar fitted lowering block 1inch fitted shortened springs spax adjustables to front fitted the diff and the prop are my concern now i believe a spitfire 3.? will be ok considering putting 4 pot calipers and discs do i need these or would type14 be good enough Link to comment Share on other sites More sharing options...
logicaluk Posted August 31, 2011 Share Posted August 31, 2011 changing to vitesse/gt6 uprights will allow you to fit type 16 calipers, with mintex 1144 pads you should be fine.Dan Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.