BIRMINGHAMTR7 Posted June 27, 2006 Share Posted June 27, 2006 hi its been so long since underside of car has had parts on i am sufering memory loss !!! gone through all the manuals and parts books but i think only you good folks can help me. i am about to take car shell off rotisserie but before i do this i want to refit fuel lines, tank and brake pipes problem is i cant remember where and how solid at rear joins flexi to axle all pictures i have i can't quite see as axle is in the way. does anyone have good picture of this rear end tunnel area with brake lines fitted. i may be missing a bracket i think many thanks Link to comment Share on other sites More sharing options...
Beans Posted June 27, 2006 Share Posted June 27, 2006 I think I have a few pictures off the brake pipe to the rearSee if I can put them here tomorrow Link to comment Share on other sites More sharing options...
Beans Posted June 28, 2006 Share Posted June 28, 2006 The first one looking from the engine backwards Link to comment Share on other sites More sharing options...
Beans Posted June 28, 2006 Share Posted June 28, 2006 And a second one looking from rear to front.These pictures are from 't Kreng ... so LHD. As far as I know that shouldn't make any difference but I am not sure :-/ Link to comment Share on other sites More sharing options...
BIRMINGHAMTR7 Posted June 29, 2006 Author Share Posted June 29, 2006 amzing how memories come flooding back.many thanks Link to comment Share on other sites More sharing options...
Beans Posted June 29, 2006 Share Posted June 29, 2006 Just forgot, the standard handbrake cable goes through the hole in the bracket to which the flexi-hose is attached with a tie-rap. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.