willows40
-
Posts
473 -
Joined
-
Last visited
Never
willows40's Achievements
-
Is the electronic ignition just a module in orginal dizzy or complete dizzy? If complete dizzy that could be the problem if curves etc are wrong for that engine. I have an mgbgt with replacement dizzy and that causes some weird running issues but on that only at higher revs so not a major problem
-
Years ago had a mk3 gt6 with rotoflex, also an early 1600 vitesse convertible, had a set of cosmics on the vitesse and slots on gt6. Did try to put the cosmics on the gt6 once, but wouldn’t fit on rears as touched the trailing arms. Don’t know what the offset on that set of wheels was and have put cosmics on another gt6 since then without a problem
-
2017 Essex Winter Rally - 19th November
willows40 replied to sparky_spit's topic in Comps & Motorsport
Hope you have put a decent seat in it for her. You can use the convertible if you want. Have a nice mgbgt to use on the rbrr, but don’t think I would be allowed -
2017 Essex Winter Rally - 19th November
willows40 replied to sparky_spit's topic in Comps & Motorsport
Colin Notice you have changed car, is Michelle driving your estate? Or are you risking my convertible to get round without breaking down -
Hi Bob As always with these things it depends on price, if sensible priced would be interested but not fussed either way
-
Larger reservoir brake, smaller clutch. It to do with fluid capacity for disc brakes,
-
I've had green stuff pads on my mgbgt auto with grooved discs for last 8 years, only thing I've really noticed is that if you do a lot of gentle braking for a few weeks, they do lose some feel and stopping gets worse. All I do is take it for a B road blast with heavy braking and that brings them back up. The pads are getting low now so will try mintex pads next time
-
My coupe is undergoing some serious welding at moment, so have been able to add a lot of extra steel and bracing to give a decent top mount for the seat belt. I'm not a fan of lap belts so wouldn't go that route myself but better than nothing
-
Hi John Thanks for info. Think you might be getting confused, not talking about a saloon but a coupe. The top of the B post is the corner of the tub not the little bit that holds the window in on a saloon. I can put extra strength in if needed as have to rebuild the B post at bottom anyhow Cheers Andy
-
Looking for opinions on mounting of seat belts to an early Herald coupe. Being an early car doesn't have to have seatbelts fitted and previously they were bolted through the floor and rear inner wheel arch. Very much like a Herald convertible. I'm thinking of fitting interia belts this time round, what is the opinion if the top of the B post is suitable as top mount? Also thinking about making some brackets to bolt the base at the bottom of the B post/rear seat panel, then the final fitting at usual Herald place at side of floor. The middle mount, I'm thinking off bolting both sides to one mount at middle of tunnel. I know about the need for spreader plate etc What do people think? Or any better ideas Cheers Andy
-
I would say heritage panels are better than steelcraft. Just fitted a pair of Herald doorskins and not a bad fit to be fair. They were the standard ones paddocks, Rimmers etc are selling. Front floorpans, the chances of finding genuine nos ones is very unlikely, there tends to be two type available at moments, the ones with the flat edge where the gearbox tunnel fit and the ones without. I would go for the first type, more expensive but better. If you are buying within next couple of weeks, Rimmers have a sale on at moment. Which makes them very competitive on price, if after that look elsewhere as most expensive
-
I have a coupe and a convertible tub here, both are worse than this one. Also both will see the road again.
-
safeguarding the future of the RBRR
willows40 replied to JohnD's topic in Round Britain Reliability Run (RBRR)
Definitely foggy in 2008, my first RBRR pouring with rain all the way down from Scotland and then thick fog down to lands end -
I'm sure my mk1 doesn't have a choke light. If it does it's not worked since I've had the car
-
No one see that when the cars are being driven, waste of time and energy painting it the same colour