PeteW Posted July 20, 2015 Share Posted July 20, 2015 Any tips on how to fit the white bumpers on the metal backing strip on Herald? Quote Link to comment Share on other sites More sharing options...
Jordon T Posted July 21, 2015 Share Posted July 21, 2015 When I had to do this on one of my prvious heralds, I found soaking the rubber bumpers in a bath of hot water really helped them to slide onto the valance. You could also use silicone lubricant/spray to help the sliding process.best regards,Jordan Quote Link to comment Share on other sites More sharing options...
Goody Posted July 21, 2015 Share Posted July 21, 2015 Having done this twice, I use plumbers grease and for the curve sections and start with the curve ends on the straight sections of the metal strips. The curve ends seem to flaten better than the straight ends going round the curves on the metal strip. I have also found on the two straight's front and rear they were a little too long and had to cut some off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.