heraldcoupe Posted December 3, 2006 Share Posted December 3, 2006 Take a read through the factory manual and familiarise yourself with what's in there. You will still have questions which can only be answered by experience, but you'll need the manual to fully understand the answers you get.Cheers,Bill. Link to comment Share on other sites More sharing options...
nick69 Posted December 3, 2006 Author Share Posted December 3, 2006 Ok thanks Bill ill get back to you in a couple of days. Link to comment Share on other sites More sharing options...
nick69 Posted March 17, 2007 Author Share Posted March 17, 2007 RIGHT!! LOLFinally got round to the body today. The doors are still as pictured above, the doors appear to be pushing the windscreen forward when they are closed and the quarter lights are as low as they will go?The doors have had some very bad repairs on the bottom in the past which isnt helping the situation.The rear tub has got a few packers I can remove but the body doesnt seem to be sitting square on the chassis. A couple of the bolt holes dont line up.Now whilst looking through the factory manual if I read it right the body should be in 2 parts, front half and back half but mine isnt, am I right in thinking this??Now has anyone got any advice on how to lift the bulkhead???Sorry to bring up this old topic but I didnt want to start again, going over old info!! Link to comment Share on other sites More sharing options...
nick69 Posted March 17, 2007 Author Share Posted March 17, 2007 Forgot to say, im going to remove all packers and rubber grommets and stuff so the body sits on the chassis clean, to start again as I want to get this right. Link to comment Share on other sites More sharing options...
wfarnworth Posted March 17, 2007 Share Posted March 17, 2007 NickHere is a link to the Herald Service Training Notes booklet for body work in PDF format.Hope it helps.http://www.computerfix-mobile.co.uk/downloads/Herald_Service_Training_Notes_Body.pdfWayne Link to comment Share on other sites More sharing options...
nick69 Posted March 17, 2007 Author Share Posted March 17, 2007 My word. A hole in one!!!That is just what ive been after. Many thanks indeed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.