blueH Posted September 2, 2007 Share Posted September 2, 2007 I am restoring my 63 Triumph Herald & have just re-fit the Voltage Regulator & Indicator Unit to Bulkhead, I made notes of which wires from the loom went to both these units but having refit the wiring I have a black cable with Lucar push on connection loose and my notes don't mention this cable (must be loosing my mind) can anyone help me identify where this black single cable should fit, I have spare connection points at either end of the Regulator, can someone tell me what this cable is for, perhaps if anyone can upload a photo that would be fantastic. Norm Link to comment Share on other sites More sharing options...
herald948 Posted September 3, 2007 Share Posted September 3, 2007 IF this helps, there should be a black (ground) wire on the "E" terminal...and Yellow/Green on the "F", two Yellows on the "D", two Browns on the "A", and two Brown/Blues on the "A1" terminal. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.