A TR7 16V Posted May 3, 2019 Share Posted May 3, 2019 Has anyone separated the indicator arm from the switch body, or even taken the plastic bit off the end? If so, how's it held in - splines or just glue? Graham Quote Link to comment Share on other sites More sharing options...
Clive Posted May 3, 2019 Share Posted May 3, 2019 I think it was the switch end I have pulled out, but whatever it was knurled. (it could have been the plastic end, or both. But decided it wasn't worth pursuing when I had many good spares, now all gone. but new are available at reasonable cost) Quote Link to comment Share on other sites More sharing options...
A TR7 16V Posted May 3, 2019 Author Share Posted May 3, 2019 Quoted from cliftyhanger- new are available at reasonable cost. I know, but I have a broken one with an arm the right length and a working one with an arm that's too long and the solution sort of seemed obvious. Actually, what I really want is to fit a late TR7 one with the main/dip, flash and horn switches as well. But I think that might be a bit like hard work. Even the cancelling collar would take work to fit on the shaft. Graham Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.