slate Posted February 3, 2010 Share Posted February 3, 2010 Hi im currently putting a 1300 i believe 65 -70 toledeo engine and overdrive box into a herald for my daughter, and like a fool ordered a clutch plate off ebay without asking how many splines it had,mine being 10, the one that turned up is a nine spline supposedly for a 1300 or 1300tc, but i cant find it on any site part list , can anyone confirm what its for,Pete Link to comment Share on other sites More sharing options...
Richard B Posted February 3, 2010 Share Posted February 3, 2010 Does it have a part number? Link to comment Share on other sites More sharing options...
slate Posted February 3, 2010 Author Share Posted February 3, 2010 Hi yes it does PTC326/hb1654and 731 written on box Link to comment Share on other sites More sharing options...
Richard B Posted February 3, 2010 Share Posted February 3, 2010 There's a HB 1654 listed on eBay, which says it is for a Vitesse. If so this should be for a 1" diameter input shaft. Link to comment Share on other sites More sharing options...
slate Posted February 3, 2010 Author Share Posted February 3, 2010 I'm not sure the HB1654 number is valid the only number printed on the box is PTC 326, and i cant find any referance to it anywherethe hb number does show up as 1300 dolomite and was quoted on the origanal add,the spigot hole is about 1/2" Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.