mowerman Posted July 1, 2008 Share Posted July 1, 2008 Whilst pondering where I can mount an oil catch tank in the Vit engine bay I had a sudden thought (doesn`t happen very often ;D) if I remove the emission breather valve and replace it with a simple pipe and catch tank will it upset the fuel/air mixture and/or will I have to re-tune the carbs? Link to comment Share on other sites More sharing options...
JohnD Posted July 2, 2008 Share Posted July 2, 2008 If you have massive blow-by and a large volume of gas coming into the inlet from the crankcase, maybe, though it won't include much oxygen as the gases come from the cylinders, after ignition.John Link to comment Share on other sites More sharing options...
lordleonusa Posted July 2, 2008 Share Posted July 2, 2008 Here's a couple of photos of my successful installation.I do intend to replace the plastic tank with an alloy one idc, but am just waiting for spare money!L Link to comment Share on other sites More sharing options...
lordleonusa Posted July 2, 2008 Share Posted July 2, 2008 Whoops, that was a bit big!Here's the 2nd smaller one.L Link to comment Share on other sites More sharing options...
ferny Posted July 2, 2008 Share Posted July 2, 2008 Here's my very much DIY attempt.http://fernys.wordpress.com/2008/04/03/20/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.