davidbradley Posted February 23, 2009 Share Posted February 23, 2009 HiI've got Stromberg CDs with an adjustment screw under the float chamber.Has anyone any tips for fitting the jet holder back in the carb body without the spring forcing the jet orifice bushing apart, and losing the rubber o seal.I have got it back together but the o ring gets displaced & cut as you tighten it all up.Just cant see how to hold the o ring in place Should I push the o ring into the bushingThanks Link to comment Share on other sites More sharing options...
Pete Lewis Posted February 24, 2009 Share Posted February 24, 2009 carefully study your manual sound like you have the parts in the wrong places Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.