Eagerbeaver Posted February 12, 2011 Share Posted February 12, 2011 I've got my engine out and the clutch - which was a replacement Borg & Beck unit was never great. Where is the best place to source a replacement, pressure plate, friction plate and release bearing? Link to comment Share on other sites More sharing options...
Hogie Posted February 12, 2011 Share Posted February 12, 2011 TR Shop Chiswick. 0208 995 6621 are very helpful.No connection, just a satisfied customerRoger Link to comment Share on other sites More sharing options...
Gt6s Posted February 12, 2011 Share Posted February 12, 2011 Clarke brothers Cromac street Belfast. (Clutch reconditioners);D Link to comment Share on other sites More sharing options...
Eagerbeaver Posted February 12, 2011 Author Share Posted February 12, 2011 Thanks, I'll try those. Link to comment Share on other sites More sharing options...
TRTOM2498 Posted February 12, 2011 Share Posted February 12, 2011 Think TR Shop have some new old stock (Laycock clutches) I snapped the clutch plate on a brand new Borg & Beck 3 piece clutch around 5 years ago. There was an issue with a batch of B & B clutch plates, I think only 3 revets holding the centre part to the friction material part. I understand there has been a correction to this now, but be careful. I think Mr Helm who posts regularly on this forum also had the same issue, too.I use a 3 piece Laycock clutch with no issues.Cheers Link to comment Share on other sites More sharing options...
michael Posted February 12, 2011 Share Posted February 12, 2011 yes changed on side of road in france regards michael Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.