paulsprint Posted March 20, 2011 Share Posted March 20, 2011 Hi, after the rubber hose (master to slave) failed on saturday I need to replace it. Does any one know what size the threads are. They are bigger than the brake master cylinder. It is my intension to make one using bango's and braded hose etc. I know Rimmers do one, but there £50 and I need it ASAP as the original rubber one is bogged to keep the car on the road. Only car at present after some scrott stole the wife's car. Cheers Link to comment Share on other sites More sharing options...
Gt6s Posted March 20, 2011 Share Posted March 20, 2011 If it's for a Sprint it "should be" 7/16 UNF both ends. Link to comment Share on other sites More sharing options...
paulsprint Posted March 20, 2011 Author Share Posted March 20, 2011 Thanks for that, It is a sprint. I'll have a look for some banjo's. Any idea of best place. Demon tweaks usually have a good range at a price or think. Anyone know of any others Link to comment Share on other sites More sharing options...
Gt6s Posted March 20, 2011 Share Posted March 20, 2011 Rally design but expensive for small packages due to their postage rate you are really better ordering other stuff at the same time to bring the weight of the package up. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.