Sienna PI Posted December 16, 2020 Share Posted December 16, 2020 Does anybody have instructions and/or a diagram for changing the O rings /seals in the pedestal part of metering unit on a Mark 2 PI please? Oil seems to be leaking from the blanking cap area on the pedestal so i have purchased an O ring / seal kit from the "Brothers" in Lincolnshire! I am ok with sorting the fuel / ignition timing and measuring the gap for the pedestal gasket shims but am wary of parting the metering unit from the pedestal, any (sensible) advice is most welcome! Cheers! Quote Link to comment Share on other sites More sharing options...
Sienna PI Posted December 16, 2020 Author Share Posted December 16, 2020 Ooooops! Have located a script / diagram Fig. 26 (1.513) in the user manual but any advice still much appreciated! Cheers! Quote Link to comment Share on other sites More sharing options...
thescrapman Posted December 17, 2020 Share Posted December 17, 2020 I think you just undo the 3 bolts and make sure nothing moves. hold the red plastic thing in place with a. Bit of grease if it keeps moving, Quote Link to comment Share on other sites More sharing options...
Sienna PI Posted December 17, 2020 Author Share Posted December 17, 2020 Quoted from thescrapman- I think you just undo the 3 bolts and make sure nothing moves. hold the red plastic thing in place with a. Bit of grease if it keeps moving, Thanks for the tip Colin! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.