Adrianb Posted February 22, 2021 Share Posted February 22, 2021 Hi all hope you are all staying safe! Please can someone advise me on the best gage of steel plate to use for repair plates on the lower half half of the front bulkhead.specifically where the bulkhead joins the floor panels many thanks. Quote Link to comment Share on other sites More sharing options...
RobPearce Posted February 22, 2021 Share Posted February 22, 2021 The original pressing was probably 20 gauge - certainly thinner than 18 but not as thin as a 1980s flimsybox. Thicker steel was used for reinforcement sections such as the mounting boxes. Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.