Trolleybus Posted May 17, 2019 Share Posted May 17, 2019 I am fitting a set of extractors sourced from CW.The space between one of the tubes exiting from the power steering is about 10mm from the front down pipe of the extractors. I would consider this too close and in danger of a heat transfer from the extractors to the steering fluid.Also does anyone know if it is possible to turn the head section of the power rack so the tubes exit to the front/ towards the engine? Quote Link to comment Share on other sites More sharing options...
iggy Posted May 18, 2019 Share Posted May 18, 2019 ive got the witor extractor manifold fitted to my mk2 saloon with power steering and theres 15 to 20mm clearance no problems with it, could you lever over the offending power steering pipe to give more clearance? Quote Link to comment Share on other sites More sharing options...
Gt6s Posted May 19, 2019 Share Posted May 19, 2019 If It is not rubbing no problem. As said just bend the pipe a bit. Laurence Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.