MR ROY Posted July 19, 2004 Share Posted July 19, 2004 I HAVE A 1974 DOLLY SPRINT WITH NO OVERDRIVE , I AM THINKING OF FITTING A OVERDRIVE WHAT DO I NEED AND WERE CAN I GET THE PARTS ,ONE MORE THINK ON MY DOLLY THERE IS NO CENTER CONSOLE OR GATER WHEN I FIT THE OVERDRIVE WILL THE CONSOLE GO ON , CHEERS FOR ANY HELP MR ROY. Link to comment Share on other sites More sharing options...
james833 Posted November 24, 2004 Share Posted November 24, 2004 Hi There - A very worthwhile conversion, you won't be sorry.....From memory, you'll need the gearbox and overdrive (!), and the o/d propshaft; also the gearstick (unless you want to mount the switch somewhere else) and the wiring. You may need a different speedo cable as well - Canley Classic will be able to advise you on that, but I think it's likely.Your console/gaiter should fit fine.James Link to comment Share on other sites More sharing options...
dolomiteman Posted November 25, 2004 Share Posted November 25, 2004 ...all you need is an overdrive 'box and stick. Everything else fits just fine. Propshaft is the same length as the non o/d 'box has an extension piece on it. Wiring is a doddle, just wire up the extra inhibitor switch that comes with the 'box in parallel to the existing one and that is it.I have a good spare 'box; I'm in the Midlands if you need one... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.