dazzer Posted November 5, 2017 Share Posted November 5, 2017 Has anyone experienced intermittent gauge reading problems for both gauges? Basically ignition on everything reads ok 30 seconds later both gauges drop off with no reading.? Many thanks for any input. Darren Quote Link to comment Share on other sites More sharing options...
poppyman Posted November 5, 2017 Share Posted November 5, 2017 Hi Darren,Sounds like voltage stabiliser unit to me.To check temp guage just put the wire off the sender to earth and needle should go to hot, same with fuel guage Cheers, Tony. Quote Link to comment Share on other sites More sharing options...
dazzer Posted November 5, 2017 Author Share Posted November 5, 2017 Hi TonyYou were right. It was the voltage stabilizer. Id put a new loom in the car and the two wires id mixed up. Green and green & light green i really didnt think it matterd which way round they went but obviosly does. Flipped them over and all working fine now.Thank youDarren Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.