Jump to content

Guppy916

Non-Member
  • Posts

    412
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Guppy916

  1. Update, new ignition switch fitted "gland" you were right it still wont run, So Iv'e checked volts to coil , +ve ignition on, NO volts and NO volts at -ve also, Turn key to crank motor 12v +ve , and 12volts -ve, fit a temp feed from battery to +ve and car runs great checked the wire from coil +ve to starter relay no breaks or shorts this is the white/yellow wire
  2. DVD3500 there are no fans on mine
  3. Rob, gland, tomorrow is a new day, and hopefully a bit warmer, I shall start checking your idea's out, many thanks for your help
  4. Yes that's what is beginning to worry me could the supplier have sent the wrong loom, 3.0ohms is that across the + and - terms my coils measure 3.9 and 3.5ohms
  5. Cheers "gland" I was sure mine is not ballasted, although I am on my third coil pic below, I have always purchased 12v Lucas coils, this is the coil I was running when I broke down, the first thing I checked was to see if it was hot, I would say hand temp. the car had a new loom when it was restored back in 2015
  6. HI yes all three webers are clean and the jets blown through
  7. no points or condenser all electronic
  8. the rev counter is cable driven from the dizzy I for forgot to say above the coil was swopped also
  9. I'm not sure if this should be in 'elctrics', any way, I was out for a spin last weekend in my MK3 GT6 when i noticed a misfire, about 3k then after a stop at a road junction it missed again about 2k, then a mile up the road it just died. on trying to restart, it would only fire then die many times, once I got it home I started from the beginning clean plugs, check fuel and filter, check for sparks, though not very good, then a friend said ignition switch 'sod off say's I' the key works the starter works, any way I jump from the battery to the coil, jump in the car hit the starter and it runs blinking great at this point my friend has this stupid grin, how, what is wrong, I have a new switch in the post, any ideas guys.
  10. Very neat Baxter, are you still running with no misfire now ?
  11. Speak to Duncan first https://www.classiccarleds.co.uk/collections/headlight-led-bulbs/Headlight-Bulbs-&-Adapters?page=1 he supplied all my led's for my GT6 mk3, they are fantastic and no mot problem's
  12. When yo put it back together make an inspection port, it's well worth the effort, I have two one for speedo and the other for checking the oil level
  13. Try Rimmer's https://rimmerbros.com/Item--i-RL1431
  14. I use Owatrol much better than WD40 you can buy it in most boat shops https://www.ebay.co.uk/itm/162393608336?hash=item25cf69d090:g:UEsAAOSw~p5dVVAU
  15. Happy year. Guys, when I did my mk3 I sent the speedo to speedy cables, they serviced and recalibrate it, to suit my diff and wheels
  16. I used H-H for the GT6 a full electronic make over of the dizzy, it's fantastic now. https://h-h-ignitionsolutions.co.uk give Lee a ring or email him, they fully recon'd mine, great job.
  17. Hi Jason just to add another job for you, I used Rimmer's P/No XKC1673FG, then I cut two access points for the speedo drive and gearbox fill port, these are very handy for checking the G/B oil and lubricating the speedo drive, they are held in with a couple of duzes fasteners,
  18. Hi I used Rimmer's Cable 60" https://rimmerbros.com/Item--i-GSD117 This cable is 3" longer than STD and Speedo Drive https://rimmerbros.com/Item--i-120694 Jason the inhibitor switches are operated via the gear lever remote as the photo shows
  19. Hogie I also fitted three of these small LED's as photo, From the top Overdrive, Engine Cooling Fan & Fuel Pump they are from https://www.carbuilder.com/uk/green-mini-led-warning-light
  20. Hi I need a new tailgate trim for my MK3 GT6, was looking at Rimmer's part number 610657 https://rimmerbros.com/Item--i-GRID008148 I found this to be slightly to tall last time, the tail gate didn't like closing, anybody have any other suggestions please
  21. On my GT6 I used https://speedycables.com/instruments/gauge-repairs-conversions/ to recal the speedo, been great ever since
×
×
  • Create New...