Curtis1360Barry Posted November 3, 2012 Share Posted November 3, 2012 Can I just pull my hubs straight of or is there a retaining clip(?) may sound a stupid question but don't want to break themCheers Quote Link to comment Share on other sites More sharing options...
Clive Posted November 3, 2012 Share Posted November 3, 2012 Front or rear?If front they come off nice and easy.If the rears you need the correct churchill tool, or a decent press. The hub WILL bend if it is not done correctly, and you will break most hub pullers trying to get it off if they are not the correct ones. Quote Link to comment Share on other sites More sharing options...
Curtis1360Barry Posted November 3, 2012 Author Share Posted November 3, 2012 Rear ones I brought the red one that shows up on eBay often, also the same as the one on the tssc shop Quote Link to comment Share on other sites More sharing options...
Clive Posted November 3, 2012 Share Posted November 3, 2012 That is the correct puller. Nope, nothing holding them on except magic (once the nut is off)Very powerful magic too. A long bar and 3 or more shredded wheat required sometimes. Also be VERY careful, when it does let go it can fly off and do serious damage. I use heavy cloth over the hub to damp the effects and hopefully stay safe.Have also done up very tight and left overnight, or warm up a bit and so on. Just be aware...... Quote Link to comment Share on other sites More sharing options...
Curtis1360Barry Posted November 3, 2012 Author Share Posted November 3, 2012 Hub is off :) and didn't fly off luckily. Thanks for your help Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.