MSter Posted November 13, 2011 Share Posted November 13, 2011 Today i have finally removed the rear tub from my herald something i should have done from the beginning the good news is the chassis is sound albeit needing a rub down and paint but its solid thats the main thing. Anyway how can i check the rear leaf spring is mot passable?? what can i check or do?? Also i would like to give it a nice lick of paint after a rub down is this ok or is it best to clean up and leave alone??have attached a few pics of my days work Link to comment Share on other sites More sharing options...
Clive Posted November 13, 2011 Share Posted November 13, 2011 If you want it pretty, then take it apart, wire brush up and paint. I wouldn't put anything thick on there though. When you reassemble, a good coat of grease between the leaves will help it move freely.As to MoT-able, it should be fine unless a leaf is cracked.BTW I wind the wire brushes for angle grinders very good for derusting. BUT a full face visor is a must, and thick clothing. The bits of wire fly off and impale you.... Link to comment Share on other sites More sharing options...
Paudman Posted November 13, 2011 Share Posted November 13, 2011 Split the leaves, clean up and grease before reassembly. then wind in grease-impregnated plumbers tape and secure the loose ends with plastic ties. Keeps all the crud off and if wound tightly can help stiffen a sagging spring. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.