Jump to content

Callyspoy

Recommended Posts

Posted

Hi folks, does anybody have any experience of fitting 165/70/13 tyres to 4.5j wheels? I want to go a little wider on some standard wheels. I'm ok with the smaller rolling radius, just whether people think it'd be ok to chuck those tyres on the rims.
Cheers!

Posted

I have run 175/70 on 4.5 rims. Done quite a few autosolo's too, no issues. They look a little pinched, but I would happily use the 165/70 with no worries.
Ah, found this little tool. About halfway down pop in the tyre size and it gives you suitable rim widths. Looks good to go!
http://www.alloywheels.com/tyrecalc.asp

(sorry to disagree Mark :P )

Posted


Hi all
A few months ago I e-mailed Bridgestone to enquire about what size rims I could fit a set of Firestone Multihawk tyres I have to. This is the reply.

Mark


Hello.

ETRTO Standards state that a 175/70R13 can be fitted to rims of the following dimensions:

4.50B
4 ½ J
5.00B    (optimal recommendation)
5J         (optimal recommendation)
5.50B
5 ½ J
6.00B
6J

So all of these would be approved under ETRTO legislative standards.

Kind regards
BSUK Technical

Posted

Cool, so with that in mind, my 165/70/13 idea should be a goer.
I appreciate the concerns about fitting them, but i'll go the way of the people who have experience in fitting them.
Cheers folks.

  • 3 weeks later...
Posted

Hi folks, update.
Fitted a pair of 165/65/13's to the front, they look good. No obvious bulginess and seems to drive/handle very nicely. I have 5 1/2 j's on tbe rear with 185/70/13's and all seems to be grand.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...