Jump to content

Welder in Basingstoke


Rychu

Recommended Posts

Alex wrote:


How much welding and where is it required?


A bit on the drivers door at the bottom. Probably a blocked drain hole caused it. I would guess about 4 inches of metal needs replacing.
Also 2 or 3 inches on the top rear of the drivers sill needs doing. The drivers seat mounting points have stress cracks which need doing. Lastly there may be a couple of small patches needed at the bottem rear of the rear wheelarches. Nothing major I think (HOPE!!!)
If its of help I will take some pictures?

Richard

Link to comment
Share on other sites

Alex wrote:
Pictures would give a better idea of whats required.....I'm assuming you need someone to come to you or is it mobile?


I would need someone coming to me (except the door) as the car is in bits.
I will get some photos tonight.

Richard

Link to comment
Share on other sites

9325 wrote:
Hi Alex,
thanks for your interest but I have managed to get a friend of a friend to do this and he lives just across the road.

Regards

Richard


No problem, any problems the as Carl says pop along to the crooked billet for a chin wagg.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...