Jump to content

32valves

Club Member
 View Profile  See their activity

  • Posts

    277

  • Joined

  • Last visited

 Content Type 

Everything posted by 32valves

  1. 32valves

    hello

    32valves replied to Rubce's topic in Lounge Bar

    I'm in !
  2. 32valves
    I used the high temperature paint from Frost''s on my rear brake drums and it has lasted pretty well. I scrubbed them with a wire brush then cleaned with paint thinners before applying the paint. Still looks OK after 8 yrs.
  3. 32valves
    Can I reserve a copy now ? 😉
  4. 32valves
    Spent the last couple of days finding and fixing a number of subtle issues. I now have all sparks rounded up and heading where they're supposed to, no more timing scatter, and consistent fueling. Went out for a 40 mile thrash at tea time and everything seems to be in order. Relieved to be back on track 😎 Oh, wait, the temperature gauge isn't working ....
  5. 32valves
    Went to continue my investigations this morning and accidentally turned the ignition on when releasing the steering lock. As I turned it off I heard a light snapping noise. Quickly discovered there was sparking across the coil (which is also new). Tried a brand new one, same thing, tried the old 6v coil, same thing. sometimes it's a small spark from the +ve and -ve terminals and sometimes it's great big spark to the centre electrode. Scratching head .....
  6. 32valves
    After managing to solve my apparent electrical problems I've spent the last few nights tuning the engine then driving the car. There's something wrong. I can't get the engine to tick over smoothly. As far as I can tell I've set it slightly rich at tick over (~4.5% CO) which generally smooths things out but examining the (new) plugs after a drive, they are white meaning lean (way too lean !). Apart from the plugs the only other new component is the distributor. Could this be the cause ? I'll be swapping it out later for an oldy but goody. My only other thoughts are air/vacuum leak ... Anyone ?
  7. 32valves
    Ignition issues fixed this morning then the car still wouldn't start, completely dead no dash lights etc. Strange as it was working fine yesterday morning. Hooked up the jump pack which started beeping immediately meaning battery problem. Multimeter showed about 7 volts across the terminals so off to Halfords for a new battery. Installed and everything working. Also checked for a leakage current just in case it was a current drain causing the battery problem but that appears normal, just enough to run the clock. Time for some road testing again but not until tomorrow now. Too much else to do.
  8. 32valves
    @rse ! Went out to get the tracking done this morning. On the way back the car started misfiring. Got home to discover that the coil was red hot. Oh and half the time the ignition switch doesn't actually turn the engine off anymore. Electrical problems AAAAAAAAARGH !
  9. 32valves
    Oh well, no tracking today. car simply refused to start. Spun the engine a treat but no sign of a spark so gave up and went to work in the modern. Came home tonight and it started first time. Lovely, electrical problems my absolute favourite. Car is now sulking under a cover in the yard where it will now stay until next week. Too much else on.
  10. 32valves
    Fitted a new steering rack and starter motor to the Sprint, my two favourite jobs at once 😉 Tracking to be checked/adjusted tomorrow. Next up is an oil change, new distributor and full tune-up then got to re-seal the windscreen. Oh, and get some miles under the tyres again 😀
  11. 32valves
    Done 😉
  12. 32valves
    Hmm, what oil are you using and how long has it been in there ? Try some 20W60. Also, change the pressure sender first and see what happens.
  13. 32valves
    I've been using an FAI electric pump for the last 10yrs, on two different cars. Never a moments trouble with it. Unfortunately they don't seem to be widely available.
  14. 32valves
    My entry is in. I first did the RBRR in 2000 in my P-reg Mimosa yellow Sprint. That car has been off the road for a few years now and is currently a rolling shell in my lock-up. I decided it was about time to re-commission it and what better reason/time than for the 25th anniversary/50th year of the RBRR. So, it's LVJ on the entry form and my good lady as co-driver. However that will mean no pork and apple pies at Pimperne, might have to re-think that one ! 😀
  15. 32valves
    Hmmmm, I beg to differ ..... 😉
  16. 32valves
    Bresco http://www.bresco.com/
  17. 32valves
    Bresco http://www.bresco.com/
  18. 32valves
    Thanks all, I've managed to get it working with a modern 4-pin relay, just an extra +ve supply lead required. There were a couple of poor connections in the circuit that also needed fettling and I may replace the air horn pump as it seems a bit hesitant sometimes but then it must be 20yrs old now. Cheers  ;)
  19. 32valves
    Bump!  (blimey it's busy in here)
  20. 32valves
    The horn stopped working on our '74 MkIV Spitfire and after a bit of investigation I think it is the relay. The question is which one do I need. The current one is a recent new replacement, a large rectangular item similar to the old one but this is listed as an overdrive relay. I've seen Part No.'s UKC2421 and 142169A (this is the one that looks like the original) listed. Any thoughts ? Typical that the MOT is booked for Friday ! Mind you, while investigating this I discovered that the Main/Dip column switch wiring was worn through and had obviously been sparking against the column, yikes !
  21. 32valves
    I thought about Amethyst for the Sprint. Obviously there are no maps for the car. Does anyone have any experience of setting this up 'from scratch' ?
  22. 32valves
    Well, I had a read through the entry form when the club mag arrived today and my entry won't be going in just yet as I haven't got my co-driver sorted. Prospective candidates are 'still thinking about it'. If the entry fills up as quickly as anticipated it looks like I'll be giving this one a miss.
  23. 32valves
    Bill - it's in the rules you have GOT to be there  ;) Radders - Durty Gurty surely?
  24. 32valves
    Might do  ;)
  25. 32valves
    I also wanted to say thanks to Nigel for a cracking job sign-posting the Sugar Loaf stop. Well done sir, found it no probs !  ;)
×
×
  • Create New...