Matt Mason Posted July 22, 2007 Share Posted July 22, 2007 Hi just got these wheels anyone know what their called etcThanks Matt Link to comment Share on other sites More sharing options...
Matt Mason Posted July 22, 2007 Author Share Posted July 22, 2007 sorry these are the wheels Link to comment Share on other sites More sharing options...
Matt Mason Posted July 23, 2007 Author Share Posted July 23, 2007 No one got any ideas????Matt Link to comment Share on other sites More sharing options...
neilnaz Posted July 23, 2007 Share Posted July 23, 2007 I have never seen them before. Have you tried on Hutch's site where he has listed quite a few alloy wheel types?Neil Link to comment Share on other sites More sharing options...
seth Posted July 23, 2007 Share Posted July 23, 2007 They are familiar to me but I can't recall who made them. Try signing up and asking here:http://retrorides.proboards86.com/index.cgiSomeone will know. :) Link to comment Share on other sites More sharing options...
Matt Mason Posted July 26, 2007 Author Share Posted July 26, 2007 On the back of mine all it has is ....made in england, 5 1/2 and AAMM ...........But they do look the same as yours.Matt Link to comment Share on other sites More sharing options...
mikeyb Posted July 29, 2007 Share Posted July 29, 2007 Sure there was another post in the last couple of weeks asking for info on this style of wheel - cant remeber where though. Some say MM, I have a 14 inch set on the PI, and without looking, am pretty sure they have Cosmic cast into the backs of them. Mine came off an MGB, seena few sets go through Ebay all happily at about twice the price I paid for mine, Colin sold a Spit 13 inch set at Stoneleigh this year.RdgsMike! Link to comment Share on other sites More sharing options...
Matt Mason Posted August 1, 2007 Author Share Posted August 1, 2007 New problem ...i cant get hold of any wheel nuts for these wheels..has anyone got any going spare or know where i could some????????Thanks Matt Link to comment Share on other sites More sharing options...
Matt Mason Posted August 1, 2007 Author Share Posted August 1, 2007 Thanks spitbang great site....just one question..what thread size are Vitesse studs??Thanks Matt Link to comment Share on other sites More sharing options...
Matt Mason Posted August 1, 2007 Author Share Posted August 1, 2007 3/8 i think ...never thought wheel nuts would be so hard to sort out. :'(Matt Link to comment Share on other sites More sharing options...
mikeyb Posted August 1, 2007 Share Posted August 1, 2007 Fitted mine to the PI using standard 2.5S/Stag alloy nuts. No good for a Spit as threads will be different. You might try a 3/8 Early Dolly Sprint nut on the off chance though . . . . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.