DGGT6 Posted February 28, 2017 Share Posted February 28, 2017 Hi guys,I need to have my crankshaft machined where the rear thrust bearing has slightly scored the flange. The machinist wants to know the current end float to figure out how much metal to put on.I thought it would be better if I could give him the original width of the rear main crank journal.Would anyone happen to have the dimension specifications of the 2500 cross drilled crankshaft please?Many thanks,Doug Quote Link to comment Share on other sites More sharing options...
piman Posted February 28, 2017 Share Posted February 28, 2017 Hello Doug, from my Triumph 2000 Mk 1 workshop manual, Rear journal width is 1.360" to 1.362" (34.544 mm to 34.595mm) 0.080" fillet radius (2.032mm), which is the same as the 2000 crank.Alec Quote Link to comment Share on other sites More sharing options...
DGGT6 Posted February 28, 2017 Author Share Posted February 28, 2017 Terrific!Many thanks Alec. Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.