Thomas4 Posted February 2, 2014 Share Posted February 2, 2014 Can somebody provide detailed photos of how to install the Front Fog Lights Fitting Kit (where to mount it on the car)?Thanks Quote Link to comment Share on other sites More sharing options...
Howard Posted February 2, 2014 Share Posted February 2, 2014 About here. I think....(The LED's either are running lights) Quote Link to comment Share on other sites More sharing options...
Beans Posted February 2, 2014 Share Posted February 2, 2014 This is how my (original) fog light brackets are fitted ...These brackets use the original bolt holes provided by the factory Quote Link to comment Share on other sites More sharing options...
Thomas4 Posted February 2, 2014 Author Share Posted February 2, 2014 Hi BeansthanksThe brackets in your picture really look like they are made for this car, whereas the brackets YKC3721 (depicted above, same for LH and RH) don't.But I am not sure whether there is a difference in the construction of the front chassis between the two cars?The two holes in the brackets YKC3721 where the set screws SH106181 go through do fit the holes in the body the same way as your bracket does, but then there is a third hole which does not fit anywhere. Quote Link to comment Share on other sites More sharing options...
Thomas4 Posted February 2, 2014 Author Share Posted February 2, 2014 Anyway I have two other brackets - original or not I guess I will use these again. Quote Link to comment Share on other sites More sharing options...
Thomas4 Posted February 2, 2014 Author Share Posted February 2, 2014 Hi HowardQuote:The LED's either are running lightsI am also planning to fit daylight running lamps, probably to the brackets shown in last post. Quote Link to comment Share on other sites More sharing options...
Thomas4 Posted February 7, 2014 Author Share Posted February 7, 2014 I got rid of the fog lamps since they didn't pass the MOT anyway and used the brackets shown above (post no. 4) to mount the daylight running lamps (see thread Sorry , link no longer available) Quote Link to comment Share on other sites More sharing options...
Stuart Wilson Posted February 10, 2014 Share Posted February 10, 2014 I just bolted mine to the bumper through the holes already there, just enlarged them very slightly Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.