A TR7 16V Posted April 29, 2018 Share Posted April 29, 2018 Can anyone tell me what the specs are for the hex head screws that hold the tank to the body - there's one goes through the bottom of the bracket that holds the boot lid stay? Oh and where to find them on Rimmers or some other suppliers web site? Graham Quote Link to comment Share on other sites More sharing options...
Pete Arnold Posted May 5, 2018 Share Posted May 5, 2018 Graham, The original part number for these 4 screws is UL2705 and Mick Dolphin has them listed as available. See - http://www.mickdolphin.co.uk/Files/TSSC%20Weblist%200817.pdf Alternatively Canley Classics state that this part is no longer available but use UL2704 which is described as "Screw - 1/4" x 1/2" Hexagon Head Acme Thread". Hope this helps Quote Link to comment Share on other sites More sharing options...
A TR7 16V Posted May 5, 2018 Author Share Posted May 5, 2018 Thanks Pete, That's exactly the reply I hoped for. Thanks again, Graham Quote Link to comment Share on other sites More sharing options...
herald948 Posted May 6, 2018 Share Posted May 6, 2018 If I remember the "secret coding" correctly, a UL2705 would be a whopping 1/8" longer (5/8") than the UL2704 (1/2"), and that difference would be difficult for the most discerning Concours judge to spot! 😉 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.