Jump to content

jimbo1986

Recommended Posts

Easy.   First look inside of the boot, feel to see if the last stud is held on by a nut.  (rear-pointy end)  If so undue the nut.  If no nut then start at ether end with a small flat screwdriver (flat plastic one works better) place flat end under the strip and gently pull up on the chrome.  It should just pop off.  Don't pry too hard as this can bend the strip.  I assume on some their might be a nut on the end at the B pillar.  If so on saloon's and Estates you will have to remove the panel on the inside to gain access.  Conv's you should be able to reach with the hood up.   If you pull out a rivit, no problem as replacements are easy to find.   To re install, just place the strip over the rivits and with the palm of your hand just a quick tap and it will snap back on.  Then install the nuts if any.    

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...