molten Posted September 9, 2011 Share Posted September 9, 2011 HelloAbout to start refitting all components behind and under dashboard.Is there any known sequence to keep to when reinstalling? Dont want to put something in anh have to remove it because I should have fitted something else first >:(Thanksscott Link to comment Share on other sites More sharing options...
molten Posted September 9, 2011 Author Share Posted September 9, 2011 I can only pressume that nothing will be in the way of anything regardless of which order they go back in.Well, I'll start with heater controls as heater has already gone in. Link to comment Share on other sites More sharing options...
bob dunn Posted September 9, 2011 Share Posted September 9, 2011 washer pipes go in first , i put mine in last , had to brake my fingers in three places. my heater on off flow switch was no good so had to pipe it direct for a while . put the pipe ends in boiling water to expand them for easy fitting. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.